Enable/Disable IP phone web access

-
Enable the following command under telephony-
VOIP_010.039.032.010(config-telephony)#service phone webAccess 0

To disable the phone access-
VOIP_010.039.032.010(config-telephony)#service phone webAccess 1

Comments

  1. Anonymous19 November 2017 at 02:12

    This blog is truly useful to convey overhauled instructive undertakings over web which is truly examination. I discovered one fruitful case of this truth through this blog. I will utilize such data now. Asterisk PBX Singapore

    ReplyDelete
  2. VoIP PBX Express21 November 2018 at 03:01

    This comment has been removed by the author.

    ReplyDelete
  3. VoIP PBX Express21 November 2018 at 03:08

    Nice Blog & Thanks for sharing this. Need IP PBX then call us @ 8444864766 or visit on the below link.

    IP PBX Office Phone Systems

    ReplyDelete
  4. Charli james21 January 2021 at 05:58

    Hello I am so delighted I located your blog, I really located you by mistake, while I was watching on google for something else, Anyways I am here now and could just like to say thank for a tremendous post and a all round entertaining website. Please do keep up the great work. asterisk based phone systems

    ReplyDelete

Post a Comment

Popular posts from this blog

Status: Local Agent is not responding. This may be due to Master or Local Agent being down.

-
If you have read my previous post , you would understand why LA and MA services are important for such a scenario and no component has backed-up, rather you get the above error message. Symptoms -   All Disaster Recovery Framework (DRF) services are down, and no new devices, schedules, or statuses can be viewed from the DRF console. Also, when you access the DRF admin pages, the above error message is received. Affected CM releases 6.1.5 and later. Resolution In order to resolve it, first, verify if the Certificate Serial Number in the keystore of Publisher is present in the Truststore of all Subscribers. Complete these steps: Log on to CUCM OS Administration page of Publisher server of the cluster setup. Choose Security > Certificate Management . The Certificate List window displays. You can use the Find controls in order to filter the certificate. Click on the ipsec.pem file and check the serial number of the certificate. Log on to CUCM OS Admin...
Read more

Understanding code yellow

-
Understanding sample code yellow alert- Oct 3 01:00:10, cms01, Error, Cisco CallManager, ccm: 147896: Oct 03 05:00:10.616 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-CodeYellowEntry: CodeYellowEntry Expected Average Delay:362 Entry Latency:20 Exit Latency:8 Sample Size:10 Total Code Yellow Entry:14 High Priority Queue Depth:2 Normal Priority Queue Depth:12 Low Priority Queue Depth:70 Cluster ID:StandAloneCluster Node ID:cms01, 3652 The above alert is about code yellow entry, it shows the time when server enters code yellow state. There are no specifications to note at this alert, CM enters code yellow when it achieves the mentioned conditions for code yellow state as mentioned in service parameters. Oct 3 01:00:12, cms01, Error, Cisco CallManager, ccm: 147897: Oct 03 05:00:12.268 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-CodeYellowExit: CodeYellowExit Expected Average Delay:0 Entry Latency:20 Exit Latency:8 Sample Size:10 Time Spent in Code Yellow:2 Number of Calls Rejected Due to C...
Read more