Local directory in CME isn't showing on phones

-
The following are the commands, which will make it work-

  • first enable http server-
ip http server

  • Provide directories URL in telephony-
url directories http://10.1.1.10/localdirectory
service local-directory

  • Provide ephone type under ephones
ephone  39
 device-security-mode none
 mac-address 5C26.0A84.23CA
 type CIPC
 button  1:4

  • Create cnf-files in telephony (this command is very important in CME, if you are configuring anything for phones in CME, this command is required to apply the changes in the cnf.)
create cnf-files

That's all to make it work!

Comments

  1. rocks7715 April 2014 at 04:09

    hi thanks a lot it worked for me...

    ReplyDelete
  2. Unknown1 May 2015 at 10:38

    Hi ...I got the same problem, can some one elaborate the above given commands

    ReplyDelete
  3. Unknown26 January 2016 at 00:37

    Thanks a lot this worked for me too

    ReplyDelete
  4. Unknown26 May 2018 at 09:40

    This is actually good to read content of this blog. A is very general and huge knowledgeable platform has been known by this blog. I in reality appreciate this blog to have such kind of educational knowledge. Asterisk based phone systems

    ReplyDelete

Post a Comment

Popular posts from this blog

Status: Local Agent is not responding. This may be due to Master or Local Agent being down.

-
If you have read my previous post , you would understand why LA and MA services are important for such a scenario and no component has backed-up, rather you get the above error message. Symptoms -   All Disaster Recovery Framework (DRF) services are down, and no new devices, schedules, or statuses can be viewed from the DRF console. Also, when you access the DRF admin pages, the above error message is received. Affected CM releases 6.1.5 and later. Resolution In order to resolve it, first, verify if the Certificate Serial Number in the keystore of Publisher is present in the Truststore of all Subscribers. Complete these steps: Log on to CUCM OS Administration page of Publisher server of the cluster setup. Choose Security > Certificate Management . The Certificate List window displays. You can use the Find controls in order to filter the certificate. Click on the ipsec.pem file and check the serial number of the certificate. Log on to CUCM OS Administr
Read more

Understanding code yellow

-
Understanding sample code yellow alert- Oct 3 01:00:10, cms01, Error, Cisco CallManager, ccm: 147896: Oct 03 05:00:10.616 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-CodeYellowEntry: CodeYellowEntry Expected Average Delay:362 Entry Latency:20 Exit Latency:8 Sample Size:10 Total Code Yellow Entry:14 High Priority Queue Depth:2 Normal Priority Queue Depth:12 Low Priority Queue Depth:70 Cluster ID:StandAloneCluster Node ID:cms01, 3652 The above alert is about code yellow entry, it shows the time when server enters code yellow state. There are no specifications to note at this alert, CM enters code yellow when it achieves the mentioned conditions for code yellow state as mentioned in service parameters. Oct 3 01:00:12, cms01, Error, Cisco CallManager, ccm: 147897: Oct 03 05:00:12.268 UTC : %CCM_CALLMANAGER-CALLMANAGER-3-CodeYellowExit: CodeYellowExit Expected Average Delay:0 Entry Latency:20 Exit Latency:8 Sample Size:10 Time Spent in Code Yellow:2 Number of Calls Rejected Due to C
Read more